- Reliable results.
Maintain the repeatability and reproducibility of your measurements. - Regulatory compliance.
Support compliance with audit requirements and quality management systems. - Predictive and preventive maintenance.
Obtain reliable data for the timely detection of anomalies. - Lower failure-related costs.
Reduce the risk of costly equipment repairs caused by undetected measurement issues.
Support your measurements
with an accredited laboratory
Reliable calibration depends on validated procedures, qualified personnel,
and demonstrable traceability.
We calibrate ICP/IEPE, charge, capacitive, and piezoresistive
accelerometers and shock transducers.
EMA Accreditation ISO/IEC 17025
Laboratory accredited under the requirements
of ISO/IEC 17025:2017 and NMX-EC-17025-IMNC-2018
for calibration services.
Traceability to CENAM
The reference standards and systems used
maintain current metrological traceability
to the Centro Nacional de Metrología (CENAM).
Internationally recognized methods
Calibrations are performed using direct
comparison methods in accordance with
ISO 16063-21 and ISO 16063-22.
We ensure the technical reliability of the results and provide documented
evidence to support quality processes, audits, and measurement validation.
Why should an accelerometer be
calibrated periodically?
Periodic calibration helps verify that the sensor continues to provide
reliable measurements for testing, analysis, and monitoring processes.
Accredited Calibration Scope
Our laboratory has accredited Calibration and Measurement Capabilities (CMCs)
for accelerometer calibration using high-frequency, low-frequency, and shock
calibration methods.
High Frequency
5 Hz to 15,000 Hz
Low Frequency
0.5 Hz to 10 Hz
Shock
20 g to 10,000 g
Calibration Services Available
Throughout Mexico
No matter where your company or laboratory is located, we accept
accelerometers from anywhere in the country for accredited calibration.
- Send your equipment from anywhere in Mexico
We work with equipment shipped
from across the country. - Well defined delivery times
Our standard service delivery time is from
2 to 7 business days, excluding shipping time. - Receive your calibration certificate and results
Your equipment is returned with its
calibration certificate and supporting
documentation. - We calibrate accelerometers from multiple manufacturers
For industrial, laboratory, research, and
condition monitoring applications.
A Clear Process
from Start to Finish
Each calibration follows established procedures designed
to ensure compliance, reliable results, and transparency
throughout the process.
Equipment receipt
We inspect the condition
of the accelerometer and
review its technical
specifications.
Accredited calibration
We perform the calibration
using traceable reference
standards and established
procedures.
Certificate issuance
We document the results in
accordance with the requirements
of ISO/IEC 17025, ISO 16063-21,
and ISO 16063-22.
Return and follow-up
We return your equipment along
with its calibration certificate
and supporting documentation.
Our team can review your accelerometer specifications to
determine the applicable calibration scope.
CONTACT THE LABORATORY
Why should you choose Grupo CTT?
Our goal is to help you maintain confidence
in your measurements and processes.
- 1 Specialized team
Metrologists and specialists with
experience in accelerometer
calibration and vibration measurement. - 2 More than 40 years of experience
Supporting quality, testing, and
research processes across a range
of industrial sectors. - 3 Technical guidance
We help you determine the applicable
calibration scope and address
questions related to your equipment
and measurements. - VISIT GRUPO CTT
Ensure Confidence
in Your Measurements
Whether you need to meet quality requirements,
standards, or procedures, support your testing
processes, or maintain the accuracy and precision
of your sensors, our team is ready to assist with
your accelerometer calibration needs.
Complete the form and one of our specialists
will contact you.
Your message was sent successfully.
Sorry!Something Went Wrong.
Frequently Asked Questions
Calibration consists of comparing measured values of a quantity of the same kind, together with their associated measurement uncertainty, between the sensor under test (SUT) and a traceable reference standard.
For accelerometer calibrations, sensitivity, measurement error, and measurement uncertainty are determined.
The average delivery time is from 2 to 7 business days, depending on the number of units received and the laboratory workload. Shipping time is not included.
Yes. We accept equipment from any state in Mexico for accredited calibration.
We calibrate accelerometers from a wide range of brands and manufacturers. If you have questions about a specific model, our team can help determine the applicable calibration scope.
The service includes equipment calibration and the issuance of a calibration certificate containing the results obtained in accordance with the applicable procedures.
Yes. We offer expedited service for calibration needs that require faster delivery times. Contact our team to check availability and service conditions.
You can email us at laboratoriovibraciones@grupoctt.com.mx or send a message to +52 449 197 3429. You can also call us at +52 449 197 3429 or 449 922 9200 ext. 111.
You may use the shipping provider of your choice. Our team will provide the necessary instructions for shipping and receiving your equipment.
The calibration interval depends on factors such as frequency of use, operating conditions, applicable quality requirements, and manufacturer recommendations. Periodic calibration helps maintain confidence in your measurements.
Calibration helps verify that the sensor continues to provide reliable measurements. It can identify deviations that could affect testing, vibration analysis, condition monitoring, and quality assurance processes.
Yes. An invoice is issued for all our services.
We accept electronic bank transfers and other payment methods authorized by our administrative team.
Monday to Friday, from 8:30 a.m. to 5:00 p.m. (Central Mexico time).
